Kammprofile Gasket

The Kammprofile Gasket (also Known As Camprofile Gasket) Is Made Up of Serrated Metal Core with a Soft Facing Material Such As Graphite, ePTFE. the Flat Metal Core is Machined on Each Contact Face with Concentric Serrations. It is the Preferred Design when Improved Performance at Low Seating Stresses Is Needed.

Kammprofile Gaskets Are Always Regarded As a Problem Solver For Heat Exchangers, Large Vessels, and Equipment That Experience Excessive Movement Caused by Thermal Expansion.

Basic Type

Item No.: JSG-KM11

Without a Guide Ring, it's Used for Tongue & Groove or Male & Female Flange. Typically Used as a Heat Exchanger Gasket, as an Upgrade to Double Jacketed Gaskets When the Lower Load is Needed.

Loose Outer Ring Type

Item No.: JSG-KM12

The Loose Outer Ring Type is Regarded as a Problem Solver for Heat Exchangers, Large Vessels and Equipment. The Outer Metallic Ring Works as Centering Ring During installation on a Flange. While the Sealing Lyers on Both Sides Protect the Flange Surface and Reinforced the Seal.

Fixed Outer Ring Type

Item No.: JSG-KM13

The Integral Outer Ring Type is for Aligning Purposes. It's Used in Raised Flanges. 

Core Design

The Standard Core Design is Parallel Which Offers the Advantages of Even Stress Distribution Across the Gasket Face. The Convex Core is a Reduced Depth of the Grooves Towards the Profile Center, Ensuring High Seating Stress in the Middle of the Core and is Effective for Low Bolt Load Applications.

• Core thickness: 3.0 mm (0.125") 

• Standard facing thickness is 0.5 mm (0.020")

• Custome other thicknesses as request

Materials

• Low Carbon Steel, SS304, SS316, 316L, SS321

• SS347, SS410, Aluminium, Copper, Brass, Nickel 200

• Monel 400, Inconel 600/625/800, Hastelloy B2, Titanium

Layer Material

• Flexible Graphite, PTFE,

• ePTFE, Non-asbestos, Silver

Stamping on the outer ring:

• Manufacturer

• Nominal Size - Pressure Range

• Core Material + Filler Material

• Manufactured to (standard)